How set the HxC jumper settings for 1 drive = ID1 in Shugart emulation ?
is useful for copying toolds disks like (OS's, memory test, scanner test, sounds test)
I want to boot from a floppy 5.25 "(utilities) and to allow copying to the drive HxC...
It's easy to read floppy disks image if the HxC is the second drive, but it's impossible to write or format the same image disk
Shugart jumper settings for Drive A ID1
-
- Posts: 41
- Joined: Sun Feb 17, 2008 10:22 pm
- Location: Ile de France
- Contact:
Re: Shugart jumper settings for Drive A ID1
on which image are you trying to write ?jbfairlight wrote:How set the HxC jumper settings for 1 drive = ID1 in Shugart emulation ?
is useful for copying toolds disks like (OS's, memory test, scanner test, sounds test)
I want to boot from a floppy 5.25 "(utilities) and to allow copying to the drive HxC...
It's easy to read floppy disks image if the HxC is the second drive, but it's impossible to write or format the same image disk
Can you write to the HxC when it set to ID0 (first drive) ?
What is your jumper setting ?