E-MU ESI 4000
Re: E-MU ESI 4000
USB HxC Floppy emulator
HxC vers. 3.7.1.5a
HxC vers. 3.7.1.5a
Re: E-MU ESI 4000
Can you share the files images you are using ?
Re: E-MU ESI 4000
Link to some of the images
https://www.sendspace.com/file/mvvw51
https://www.sendspace.com/file/mvvw51
Re: E-MU ESI 4000
Try the attached firmwaredjbuzzard wrote: ↑Wed Jul 07, 2021 1:26 amLink to some of the images
https://www.sendspace.com/file/mvvw51
(Update procedure : https://hxc2001.com/docs/gotek-floppy-e ... pdate.html )
- Attachments
-
- HxCUSBFE.UPD
- (80.5 KiB) Downloaded 266 times
Re: E-MU ESI 4000
Jeff,
Thanks...question though...can this update be done from a Mac?
Thanks...question though...can this update be done from a Mac?
Jeff wrote: ↑Wed Jul 07, 2021 8:46 amTry the attached firmwaredjbuzzard wrote: ↑Wed Jul 07, 2021 1:26 amLink to some of the images
https://www.sendspace.com/file/mvvw51
(Update procedure : https://hxc2001.com/docs/gotek-floppy-e ... pdate.html )
Re: E-MU ESI 4000
Yes you just need to copy the file to the stick. please have a look to the instructions.
Re: E-MU ESI 4000
Updated the firmware to 3.7.4.1 made little better progress with it reading the .img but it fails with a CRC error. Any ideas?
Re: E-MU ESI 4000
At which point did you got the CRC error ?
Have you tried another usb stick ?
Can you share the IMG image you are using ? (you can sent it to hxc2001 at hxc2001 dot com)
Have you tried a HFE file image ?
Re: E-MU ESI 4000
It starts loading the image and fails within a minute.
Re: E-MU ESI 4000
Can you send me this image ?
Re: E-MU ESI 4000
Also I just tried these again and they all had a Floppy CRC Error
https://www.dropbox.com/sh/qef0nglwekzs ... tGGsa?dl=0
https://www.dropbox.com/sh/qef0nglwekzs ... tGGsa?dl=0
Re: E-MU ESI 4000
Even the HFE file ?djbuzzard wrote: ↑Tue Jul 13, 2021 11:47 pmAlso I just tried these again and they all had a Floppy CRC Error
https://www.dropbox.com/sh/qef0nglwekzs ... tGGsa?dl=0
Can you try to format the HFE image with the machine and send me/share the file even if it fail ?
(Have you a Gotek with an ARTERY or a STM uC ?)
Can you try to load this file ? :
https://hxc2001.com/vrac/ESI_sw_classic_1_img.hfe
(this one was tested successfully on an HxC Gotek and the ESI 4000)
Re: E-MU ESI 4000
Not sure about ARTERY or a STM uC but I tried the file and got a "Missing Address Mark" error. Here's some previous attempts on vid:
https://www.sendspace.com/file/92eelk
https://www.sendspace.com/file/92eelk