Hi Jeff
Please see the detail of image file of PC98 .
http://www.retropc.net/yui/np2.html
Here at [binary(426kb)] please download and tell me the detail of
image file of it.
Jeff do you know I made the prototype version 20 set but now it's
cannot work.
I can buy your officer version If it can work.
The model that I ever show you is the one of many model.
Now I want only image file first .
If you can tell me the image file I just order you 2 set first.
Next step leave me work on my lab.
Hope you can help me.
Ps. The Emulator is Neko project II for PC.
Thank you for reading.
Sixty_cel
My SD CARD Prototype work smooth with PC But WETO on PC98
Yes I want to know the property of it and then I shall set config of it.
Because I'm cannot to know or analysis the floppy disk spec.
But the system of pc 98 is dos japanese and can accept the english dos
format at 720k only.
I ever set config
at -track type MFM , 80 track ,9sec/track,sector ID start 1 ,300rpm
512 sector, 250kbit/sec ,Gap 3 50, Inter leave 1,total sector 1440
totalsize 737280,
It can start around 3second to start format but cannot format in finally.
the format of them have 3 type
640k 8sector,2640k 9sector ,1 M 8sector
Thank you for reading
Because I'm cannot to know or analysis the floppy disk spec.
But the system of pc 98 is dos japanese and can accept the english dos
format at 720k only.
I ever set config
at -track type MFM , 80 track ,9sec/track,sector ID start 1 ,300rpm
512 sector, 250kbit/sec ,Gap 3 50, Inter leave 1,total sector 1440
totalsize 737280,
It can start around 3second to start format but cannot format in finally.
the format of them have 3 type
640k 8sector,2640k 9sector ,1 M 8sector
Thank you for reading