Hello all,
Our company (together with Jeff) have found the solution to work with the Emulator on Hitachi Analyzers. Please feel free to contact me: Service@Labcon.de
Best Regards
Dennis
HxC on a chemistry analyser
Re: HxC on a chemistry analyser
HXC Floppy Emulator on Hitachi Analyzers Hitachi 911 Hitachi 912 Hitachi 917 Hitachi 902 Elecsys 2010 Dont hesitate to contact me! service[at]labcon.de
-
- Posts: 4
- Joined: Sun Jun 16, 2013 5:03 pm
Re: HxC on a chemistry analyser
Hi Jeff
I just buy a HxC REV.F to use for Hitachi 717 Chemistry analyzer. I'm using a SD card Buffalo 4G. After i formated SD card to FAT32, I created a Floppy disk image (3''5 1.44MB DSHD FAT12 and 5''25 1.2MB DSHD FAT12) from HxCFloppyEmulator software. I copy them to SD card. I plug HxC REV.F to analyzer, set jumper ID1A to ON and format it. It formated Okey. After that i copy file from Drive 1 to Emulator but it error. Instrument display "FD write" error. I don't know what problem and how to resolve it ? I sent to you file Hfe which instrument formated okey.
I just buy a HxC REV.F to use for Hitachi 717 Chemistry analyzer. I'm using a SD card Buffalo 4G. After i formated SD card to FAT32, I created a Floppy disk image (3''5 1.44MB DSHD FAT12 and 5''25 1.2MB DSHD FAT12) from HxCFloppyEmulator software. I copy them to SD card. I plug HxC REV.F to analyzer, set jumper ID1A to ON and format it. It formated Okey. After that i copy file from Drive 1 to Emulator but it error. Instrument display "FD write" error. I don't know what problem and how to resolve it ? I sent to you file Hfe which instrument formated okey.
- Attachments
-
- HFE file formated okey.rar
- (51.86 KiB) Downloaded 776 times
-
- Posts: 4
- Joined: Sun Jun 16, 2013 5:03 pm
Re: HxC on a chemistry analyser
Hi Jeff,
I have a problem with HxC Emulator Rev.F on Elecsys 2010 analyzer. Before that instrument was using a CF-FD Emulator but I want to replace it by HxC Emulator. I converted files .img on CF Card to .hfe files. Make a config file with interface mode IMB PC 1.44MB. Set jumper ID0A to ON. But instrument can not start up. I don’t know where is wrong? Pls give me some advise.
It using firmware version 1.2.8.40. I send you files .img which using on CF card for refer.
I have a problem with HxC Emulator Rev.F on Elecsys 2010 analyzer. Before that instrument was using a CF-FD Emulator but I want to replace it by HxC Emulator. I converted files .img on CF Card to .hfe files. Make a config file with interface mode IMB PC 1.44MB. Set jumper ID0A to ON. But instrument can not start up. I don’t know where is wrong? Pls give me some advise.
It using firmware version 1.2.8.40. I send you files .img which using on CF card for refer.
- Attachments
-
- disk0.zip
- (99.39 KiB) Downloaded 737 times
Re: HxC on a chemistry analyser
Please Contact me at service@labcon.de !truongminhvl wrote:Hi Jeff,
I have a problem with HxC Emulator Rev.F on Elecsys 2010 analyzer. Before that instrument was using a CF-FD Emulator but I want to replace it by HxC Emulator. I converted files .img on CF Card to .hfe files. Make a config file with interface mode IMB PC 1.44MB. Set jumper ID0A to ON. But instrument can not start up. I don’t know where is wrong? Pls give me some advise.
It using firmware version 1.2.8.40. I send you files .img which using on CF card for refer.
HXC Floppy Emulator on Hitachi Analyzers Hitachi 911 Hitachi 912 Hitachi 917 Hitachi 902 Elecsys 2010 Dont hesitate to contact me! service[at]labcon.de
Re: HxC on a chemistry analyser
HXC Floppy Emulator in Hitachi 912!
- Attachments
-
- DSCN8762 (Klein).jpg (77.44 KiB) Viewed 10996 times
-
- DSCN8758 (Klein).jpg (75.71 KiB) Viewed 10996 times
-
- DSCN8755zug (Klein).jpg (77.31 KiB) Viewed 10996 times
HXC Floppy Emulator on Hitachi Analyzers Hitachi 911 Hitachi 912 Hitachi 917 Hitachi 902 Elecsys 2010 Dont hesitate to contact me! service[at]labcon.de
Re: HxC on a chemistry analyser
i have the same problem with gotec how you solve it plstruongminhvl wrote: ↑Tue Aug 20, 2013 4:38 amHi Jeff
I just buy a HxC REV.F to use for Hitachi 717 Chemistry analyzer. I'm using a SD card Buffalo 4G. After i formated SD card to FAT32, I created a Floppy disk image (3''5 1.44MB DSHD FAT12 and 5''25 1.2MB DSHD FAT12) from HxCFloppyEmulator software. I copy them to SD card. I plug HxC REV.F to analyzer, set jumper ID1A to ON and format it. It formated Okey. After that i copy file from Drive 1 to Emulator but it error. Instrument display "FD write" error. I don't know what problem and how to resolve it ? I sent to you file Hfe which instrument formated okey.