SUN MCS2000 SL - engine tester with HxC emulator
Re: SUN MCS2000 SL - engine tester with HxC emulator
Hi my discs are also broken any chance someone could share the files, ideally English, but any language will do, also looking for master disc
email is gareth.downton@btinternet.com
email is gareth.downton@btinternet.com
Re: SUN MCS2000 SL - engine tester with HxC emulator
Hi my discs are also broken any chance someone could share the files, ideally English vers. 6.14, but any language and version will do, also looking for master disc.
my email is hans.rietveld@gmail.com
Thanks in advance.
my email is hans.rietveld@gmail.com
Thanks in advance.
-
- Posts: 1
- Joined: Sun Nov 19, 2017 1:58 pm
Re: SUN MCS2000 SL - engine tester with HxC emulator
Hello
i have the same problem- need softwaare for this tool as new as possible, the best would be in English, but German will be good too
my email is krokwamaciej@wp.pl
i'll be very grateful for helb
best regards
i have the same problem- need softwaare for this tool as new as possible, the best would be in English, but German will be good too
my email is krokwamaciej@wp.pl
i'll be very grateful for helb
best regards
Re: SUN MCS2000 SL - engine tester with HxC emulator
Hi, I´ve got a SUN MCS2000SL machine and my system floppy disk is broken. Can you help me Jeff? I think you have a deutsch version of it. It would be great for me. My email is JLSMAIA@SAPO.PT
Thank you very much
Thank you very much
-
- Posts: 1
- Joined: Sun Aug 05, 2018 10:30 pm
Re: SUN MCS2000 SL - engine tester with HxC emulator
Hello,
I have got a sun mcs 2000sl an changed the floppy drove for a hxc emulator witch works great!!!
I am searching for the serivice software to be able to switch of te calibration that needs to be done every 6 months.
Does anybody has this disk as hxc compatibel file?
It would be a big help for us to be able to switch of this calibration.
Thanks,
Jeroen
I have got a sun mcs 2000sl an changed the floppy drove for a hxc emulator witch works great!!!
I am searching for the serivice software to be able to switch of te calibration that needs to be done every 6 months.
Does anybody has this disk as hxc compatibel file?
It would be a big help for us to be able to switch of this calibration.
Thanks,
Jeroen
-
- Posts: 1
- Joined: Fri Jun 21, 2019 10:14 pm
Re: SUN MCS2000 SL - engine tester with HxC emulator
Hi!
I also got that machine (SUN MCS2000 SL) and my floppy disks are broken. I would like to buy an emulator but I dont have soft to this machine.
Can somebody help me and advise me what emulator I should buy?
Thanks, Alexis
I also got that machine (SUN MCS2000 SL) and my floppy disks are broken. I would like to buy an emulator but I dont have soft to this machine.
Can somebody help me and advise me what emulator I should buy?
Thanks, Alexis
Re: SUN MCS2000 SL - engine tester with HxC emulator
hello my name is wiel from the netherlands, i have many used parts from the Sun mcs sl.
Best regards wiel
Best regards wiel
Re: SUN MCS2000 SL - engine tester with HxC emulator
Hello
I have a SUN MCS 2000SL. I just have an oldtimer that I check once and awhile with it. Always worked fine with the floppy's, but last week, I get an error with my boot floppy. Does anyone know where to find the floppy's? Or where to fine the files to use with the emulator? Not sure what I'm gonna do, depends on what I find first...
grtz, D
I have a SUN MCS 2000SL. I just have an oldtimer that I check once and awhile with it. Always worked fine with the floppy's, but last week, I get an error with my boot floppy. Does anyone know where to find the floppy's? Or where to fine the files to use with the emulator? Not sure what I'm gonna do, depends on what I find first...
grtz, D
Re: SUN MCS2000 SL - engine tester with HxC emulator
Nobody?
I already dumped the second floppy, So I can trade if necesarry..
I already dumped the second floppy, So I can trade if necesarry..
Re: SUN MCS2000 SL - engine tester with HxC emulator
If it is on the second disk, I can help you out... Mine is overruled...Jeroen.liebens wrote: ↑Sun Aug 05, 2018 10:53 pmHello,
I have got a sun mcs 2000sl an changed the floppy drove for a hxc emulator witch works great!!!
I am searching for the serivice software to be able to switch of te calibration that needs to be done every 6 months.
Does anybody has this disk as hxc compatibel file?
It would be a big help for us to be able to switch of this calibration.
Thanks,
Jeroen
Re: SUN MCS2000 SL - engine tester with HxC emulator
Looks like a lot of people are struggling for support, I am still looking for a english boot disc, I have got lots of the vechicle specific discs, english disc 2, and a few german version boot discs..
Anyone interested in doing a trade?
Anyone interested in doing a trade?
Re: SUN MCS2000 SL - engine tester with HxC emulator
I am interested to image and backup them. But i personally don't have any SUN MCS2000.
Re: SUN MCS2000 SL - engine tester with HxC emulator
Hola yo tengo el disco de arranque en español y otros pero me da problemas el software hxc para leer y hacer una copia imagen del disco , en la maquina funciona perfectamente . Pero no se como hacer una copía del disco para guardarlo , estado leyendo en el foro y seré el primero que no sabe hace la captura de imagen para luego modificarla con el software hxc
Re: SUN MCS2000 SL - engine tester with HxC emulator
Dmax, Do you have that service disk for adjusting the time and switch off the half year calibration?
Please let me know if you have it. Others offcourse to please.
I am from the netherlands and have Dutch manuals and dutch disks if somebody is intrested in it.
Please let me know if you have it. Others offcourse to please.
I am from the netherlands and have Dutch manuals and dutch disks if somebody is intrested in it.
Re: SUN MCS2000 SL - engine tester with HxC emulator
Hi guys
I just bought miself the MCS 2000 1996 model i guess , and i have to be honest , i don t know anything about it
I ask some help because o have seen a few guys who are well informed ,and have also software for this thing
I intend to make the tester usable , me being mechanic ,and i work a lot on cars from the 80 s , maybe 90s
Please help
Here s my email also
vizirudolf78@yahoo.com
Any info any help is truly appreciated
Btw i live in Germany
I just bought miself the MCS 2000 1996 model i guess , and i have to be honest , i don t know anything about it
I ask some help because o have seen a few guys who are well informed ,and have also software for this thing
I intend to make the tester usable , me being mechanic ,and i work a lot on cars from the 80 s , maybe 90s
Please help
Here s my email also
vizirudolf78@yahoo.com
Any info any help is truly appreciated
Btw i live in Germany