Hi,
I would like to announce some small command-line tools that can convert floppy image files in IMG-format for the Sequential Prophet 2000/2002 into syx-files, and vice versa. In turn, the syx-files can be converted into p2k-files, and vice versa.
These tools are open-source and can be found here:
https://sourceforge.net/projects/p2000floppy/
https://sourceforge.net/projects/p2ksyx/
Further information and usage examples can be found in the README-files within the distributions.
I have tested the tools with some floppies which I have converted via "HxCFloppyEmulator" into IMG-files.
It works well so far. Nevertheless, the tools are still not fully tested, so they could be buggy and/or incomplete, so there is no warranty... (Please see the disclaimers within the README-files.)
Hope this is helpful.
Regards,
kmi9000
Conversion tools for the floppy format of the Sequential Prophet 2000/2002
-
- Posts: 1
- Joined: Fri May 03, 2019 11:47 pm
Re: Conversion tools for the floppy format of the Sequential Prophet 2000/2002
Thank you very much!
You made my day!!
BTW I'm writing a sample conversion tool and need more detailed info about the Prophet 2000/2002 format.
Is there a specification document somewhere? I would like to add support for the Prophet 2K on both IMG and syx format but can't find the full specification.
Thank you in advance.
You made my day!!
BTW I'm writing a sample conversion tool and need more detailed info about the Prophet 2000/2002 format.
Is there a specification document somewhere? I would like to add support for the Prophet 2K on both IMG and syx format but can't find the full specification.
Thank you in advance.