Please send me the hfe by email : hxc2001 at hxc2001 dot com
Roland S-550 issues
Re: Roland S-550 issues
Re: Roland S-550 issues
Fixed by email. The image/emulator wasn't in Shugart interface mode but it was wrongly set in PC interface mode.nutjob wrote: ↑Thu Feb 04, 2021 11:46 amBy necessity I am using this image as it is the only one that supports additional SCSI hard disks and CD ROMs. It totally works - its just that I need to reselect the disk image on the front panel of the HxC twice through the boot process. I don't have this problem when I write the image to an actual floppy.
-
- Posts: 7
- Joined: Sat Dec 24, 2022 8:19 am
Re: Roland S-550 issues
Could you also post what system the Roland G-800 uses and a link to updating the relevant firmware..i have been floundering around for days trying to get my Roland to recognize my Gotek which is flashed and showing FF but keeps showing E3..thanks!
Re: Roland S-550 issues
This is this firmware :Late Bloomer wrote: ↑Thu Jan 19, 2023 9:43 amCould you also post what system the Roland G-800 uses and a link to updating the relevant firmware..i have been floundering around for days trying to get my Roland to recognize my Gotek which is flashed and showing FF but keeps showing E3..thanks!
https://hxc2001.com/store/