Roland S-50/S-330/S-550 samplers...
Re: Roland S-50/S-330/S-550 samplers...
I just tried out my S-330 with HxC and I also herewith confirm that the floppy emulator is working superb without any limitations.
-
- Posts: 7
- Joined: Wed Jun 01, 2011 9:16 pm
Re: Roland S-50/S-330/S-550 samplers...
Hello Jef,
I successfully installed rev C into Roland MV30 with your help last year.
Today I have replaced my Roland S330 floppy drive with a new rev F . I did almost the same things
I did with rev C, but s330 do not boot up ('Please insert system disk').
Almost means I didn't touch dip swithcs. Only the first (ID0A) is ON.
I am sending my hfe file.
Can you suggest what am I doing wrong ?
I successfully installed rev C into Roland MV30 with your help last year.
Today I have replaced my Roland S330 floppy drive with a new rev F . I did almost the same things
I did with rev C, but s330 do not boot up ('Please insert system disk').
Almost means I didn't touch dip swithcs. Only the first (ID0A) is ON.
I am sending my hfe file.
Can you suggest what am I doing wrong ?
Re: Roland S-50/S-330/S-550 samplers...
Try to reverse the floppy cable (colored wire at the other side).
-
- Posts: 7
- Joined: Wed Jun 01, 2011 9:16 pm
Re: Roland S-50/S-330/S-550 samplers...
I got it to work. Thanks.
-
- Posts: 8
- Joined: Thu Feb 21, 2013 1:26 pm
Re: Roland S-50/S-330/S-550 samplers...
Hi,
Does anyone have any library .hfe images for the 550?
Thank you.
Does anyone have any library .hfe images for the 550?
Thank you.