Hello,
The boot loader is still running after at least 30 minutes.
TX: is at 23199732 and RX: 13587034 and still going.
Is this correct? The install document said a few minutes.
Regards John
Bootloader install time how long? so far 30 minutes
-
- Posts: 3
- Joined: Mon Jul 05, 2021 8:05 pm
-
- Posts: 3
- Joined: Mon Jul 05, 2021 8:05 pm
Re: Bootloader install time how long? so far 30 minutes
OK,
It's now hung at TX:24347314 and RX:14175939
Anyone have any ideas, is this normal?
John
It's now hung at TX:24347314 and RX:14175939
Anyone have any ideas, is this normal?
John
-
- Posts: 3
- Joined: Mon Jul 05, 2021 8:05 pm
Re: Bootloader install time how long? so far 30 minutes
Power off/on gotek, retry, worked, humm, how ever very odd
Re: Bootloader install time how long? so far 30 minutes
The install time duration is generally between 2 and 4 minutes.Outsidewall wrote: ↑Mon Jul 05, 2021 8:36 pm Power off/on gotek, retry, worked, humm, how ever very odd
I think that you got some link errors for some reasons. In such situation you have to restart the install process (what you have done).
Re: Bootloader install time how long? so far 30 minutes
Hi, I am currently installing the bootloader. But it goes so slow. After about 2 hours it stopped.
I am using a serial TTL cable. Tried to adjust the speed to 128000 and did a retry but it still runs slow.
What am i doing wrong?
I am using a serial TTL cable. Tried to adjust the speed to 128000 and did a retry but it still runs slow.
What am i doing wrong?
-8 bitar är nog!
Re: Bootloader install time how long? so far 30 minutes
Power off-on and retry for the third time it worked
-8 bitar är nog!