I wanted to test a Gotek flashed with HxC in a Korg I5M, which I had laying around.
Korg I5M needs a 34 to 26 pin ribbon cable adapter, which I ordered from here:
https://www.ebay.de/itm/304011493903
my OLED screen tells me that the cable is reversed, but if I turn the adapter, then the device and Floppy emulator stays off.
Any ideas?
additionally, Im a bit green on the installation here, but the seller of the adapter told me, that the adapter should as per following within the Factory System Firmware. [which should be easy to do on the HxC platform together with HxC Floppy emulator Software]
Hello, please download the program from the link: http://www.ketron.it/images/ketron/soft ... ketron.exe
1. Install the program as admin on the PC.
2. Execute the program (Virtual Floppy Format).
3.Select a flash disk (USB stick) min 8Gb.
4. Select number of partition: 1000
5. Select Floppy partition size 1.44 mb.
6. Start format.
After formatting start the program Virtual Floppy Explorer, select virtual floppy disks and copy midifiles.
The rest is self-explanatory.
Emulator SFR1M44-U100K has jumper settings. 1 jumper must be set to S1. And the others have to get out.