Hi, I'm having trouble getting the Serial Bridge to connect to my Gotek.
I just get " COMxx access error ! " every time unless I connect through COM1 which is not the the TTL cable.
I have followed the instructions, the TX/RX etc connected up. If I power up the Gotek without the J3 header fitted and a serial monitor running, I can get "> Host Library V1.0.0 Initialized" to print so I'm assuming that I have things wired correctly.
I have tried a few different cables and have verified on my scope that they are working.
I'm on windows 10 if that makes a difference. I have tried running the app as administrator and also running it in various compatibility modes, but still no joy.
Does anyone have any ideas for something I might have missed?
Many thanks
Serial Bridge COM access error !
-
- Posts: 2
- Joined: Sat Nov 05, 2022 6:17 pm
Re: Serial Bridge COM access error !
OK i managed to get it sorted by using the offline USB A to USB A method.
I guess i must have a dodgy RX pin on my gotek possibly.
I guess i must have a dodgy RX pin on my gotek possibly.