Clearly I'm doing something wrong.
But clicking LOAD then selecting any IPF file.. always presents: "Load Error! Read File Error!"
How can I get an IPF file mounted using HXC 2.0.12.2 ?
I'm using the USB Emulator Rev D + Amiga 1200, where the 1200 sees it as DF1.
PS: Standard ADF files mount A-OK and no problems.
Thanks in advance.
I thought HXC 2.0.12.2 could read IPF files?
Re: I thought HXC 2.0.12.2 could read IPF files?
Ask to SPS/Caps the DLL:
http://www.softpres.org/download
http://www.softpres.org/download
Re: I thought HXC 2.0.12.2 could read IPF files?
So I did download that, and put the files in the
C:\Program Files (x86)\Common Files\Software Preservation Society
directory.
I have both CAPSImg.dll and CAPSImg_x64.dll in the same directory (listed above.)
Still.. nothing.
Thoughts?
C:\Program Files (x86)\Common Files\Software Preservation Society
directory.
I have both CAPSImg.dll and CAPSImg_x64.dll in the same directory (listed above.)
Still.. nothing.
Thoughts?
Re: I thought HXC 2.0.12.2 could read IPF files?
put it in the hxc software folder.jeremym wrote:So I did download that, and put the files in the
C:\Program Files (x86)\Common Files\Software Preservation Society
directory.
I have both CAPSImg.dll and CAPSImg_x64.dll in the same directory (listed above.)
Still.. nothing.
Thoughts?
Re: I thought HXC 2.0.12.2 could read IPF files?
That did it.
Thanks for the tip.
PS: Was that documented somewhere and I just missed it?
Thanks for the tip.
PS: Was that documented somewhere and I just missed it?