How to enter software manager on reboot

HxC Floppy Emulator on Amiga support
Post Reply
Morten
Posts: 2
Joined: Sat Oct 08, 2011 10:36 pm

How to enter software manager on reboot

Post by Morten »

Hi, hope someone can offer some help on the following issue:

1. I load a game with F7/F10 from the manager.
2. Is it then possible to do a reboot with Ctrl+A+A from the game and re-enter software menu without pushing the middle button?

I have enable auto boot and index Pre incrementing but this is not working.
How should I set the config file to re-enter software menu after reboot?
I don't want the last game to restart after reboot.
Last edited by Morten on Sun Oct 09, 2011 11:22 am, edited 1 time in total.

Jeff
Site Admin
Posts: 8093
Joined: Fri Oct 20, 2006 12:12 am
Location: Paris
Contact:

Re: How to enter software manager on reboot

Post by Jeff »

Morten wrote:Hi, hope someone offer some help on the following issue:

1. I load a game with F7/F10 from the manager.
2. Is it then possible to do a reboot with Ctrl+A+A from the game and re-enter software menu without pushing the middle button?

I have enable auto boot and index Pre incrementing but this is not working.
How should I set the config file to re-enter software menu after reboot?
I don't want the last game to restart after reboot.
You have to enable "Force loading AUTOBOOT.HFE at power up".
But this only works after a power up, and not from Ctrl+A+A reset.
So you have to switch off and on the power supply for the file selector.

Morten
Posts: 2
Joined: Sat Oct 08, 2011 10:36 pm

Re: How to enter software manager on reboot

Post by Morten »

Thanks Jeff,
Do you think it would be possible to implement a function that loads AUTOBOOT.HFE from Ctrl+A+A reset by holding down a key while re-booting?
Holding down the key would then override loading of last disk image and instead enter the software menu.

pulkomandy
Posts: 132
Joined: Sun Mar 20, 2011 6:55 pm

Re: How to enter software manager on reboot

Post by pulkomandy »

The floppy drive cannot know when the computer is reset. This would need an hardware change to your computer (for example detecting the RESET signal from the keyboard).

Jeff
Site Admin
Posts: 8093
Joined: Fri Oct 20, 2006 12:12 am
Location: Paris
Contact:

Re: How to enter software manager on reboot

Post by Jeff »

pulkomandy wrote:The floppy drive cannot know when the computer is reset. This would need an hardware change to your computer (for example detecting the RESET signal from the keyboard).
There are maybe a way : connect the reset signal to the select button ;)

Post Reply