Hi-res monochrome is the only mode I can use with Notator.
I'm really happy with the Gotek performance, except the OSD function is not working properly.
Unfortunately the text is garbled, I think it is becuase the firmware is set to 31Khz, and the display needs 35.8Khz
I downloaded the custom firmware with both VSYNC & HSYNC and attached the Gotek to the appropriate place in the circuit.
I experimented with different 'Screen / resolution types'
[40x24 - 31khz] was the closest but the text is still garbled
With the Atari connected using Hi-Res>VGA cable the monitor reports:
Resolution = 640x400
Vertical refresh rate (VSYNC) = 72Hz
Horizontal refresh rate (HSYNC) = 35.8kHz
As you can see the text is displayed but is garbled.
This 35.8Khz horizontal refresh rate reported by the monitor is corroborated by information in the pages below:
https://info-coach.fr/atari/documents/myFAQ.php (VSYNC 71Hz HSYNC 35.8 KHz)
https://www.exxoshost.co.uk/forum/viewt ... 5&start=40 (VSYNC 71.2Hz HSYNC 35.8 KHz)
If possible could we get a custom firmware update with the option set to 35.8khz, would be most appreciated.
I spent a lot of time getting this far, and it would be nice for it to be functioning fully
![Smile :)](./images/smilies/icon_smile.gif)
Thanks
The pictures below explain the wiring for anyone wishing to undertake this in Hi-Res mono mode.
![Image](https://www.dropbox.com/s/y79cusuvgdy9679/Photo%2003-03-2020%2C%2019%2030%2008.jpg?raw=1)
![Image](https://www.dropbox.com/s/fiwm2zt230lrz4x/Photo%2003-03-2020%2C%2019%2014%204222.jpg?raw=1)
![Image](https://www.dropbox.com/s/yl2j3vsd2sqtxo3/Untitled-1.jpg?raw=1)