Amstrad CPC floppy cable
Amstrad CPC floppy cable
HI!
Just got my new HxC unit from Peter (thanks!) and I want to use it with a CPC 6128. Do you know how can I make the cable that goes from the HxC to the CPC (floppy link)? I have a 3.5, 34 pins PC one ready. I have been searching around the forum and websites but I am still unsure how to do it.
Thanks a million!
Just got my new HxC unit from Peter (thanks!) and I want to use it with a CPC 6128. Do you know how can I make the cable that goes from the HxC to the CPC (floppy link)? I have a 3.5, 34 pins PC one ready. I have been searching around the forum and websites but I am still unsure how to do it.
Thanks a million!
Re: Amstrad CPC floppy cable
external or internal ?cpharlok wrote:HI!
Just got my new HxC unit from Peter (thanks!) and I want to use it with a CPC 6128. Do you know how can I make the cable that goes from the HxC to the CPC (floppy link)? I have a 3.5, 34 pins PC one ready. I have been searching around the forum and websites but I am still unsure how to do it.
Thanks a million!
Mmm.... I cant build a PCB, can I use a blank pcb?
(Like this one: http://rsk.imageg.net/graphics/product_ ... 99w345.jpg )
(Like this one: http://rsk.imageg.net/graphics/product_ ... 99w345.jpg )
-
- Posts: 43
- Joined: Wed Sep 24, 2008 2:38 pm
- Contact:
Here are some infos, but in german. There's a picture of the connections for the drive.
http://www.cpc-forum.de/phpbb/viewtopic.php?t=582
CPCWiki has a lot of schematics:
http://cpcwiki.eu/index.php/Technical_documentation
http://www.cpc-forum.de/phpbb/viewtopic.php?t=582
CPCWiki has a lot of schematics:
http://cpcwiki.eu/index.php/Technical_documentation
yescpharlok wrote:Mmm.... I cant build a PCB, can I use a blank pcb?
(Like this one: http://rsk.imageg.net/graphics/product_ ... 99w345.jpg )
schematic of the cable / pcb :
-
- Posts: 43
- Joined: Wed Sep 24, 2008 2:38 pm
- Contact:
-
- Posts: 15
- Joined: Wed Dec 03, 2008 9:16 pm
Amstrad CPC --external-- floppy cable
Hello everyone, and thank you very much for this device as incredible:
I'm new to this forum.
I do not speak English, this is a translation and I apologize for errors.
I want to connect my HxC Floppy Emulator on an Amstrad 6128, at the rear connector (external).
I have seen these messages in the schema (thanks Jeff) for an internal connection, but I do not know how to connect in the back.
Please, can any of you give a little help?.
Thanks and best regards.
I'm new to this forum.
I do not speak English, this is a translation and I apologize for errors.
I want to connect my HxC Floppy Emulator on an Amstrad 6128, at the rear connector (external).
I have seen these messages in the schema (thanks Jeff) for an internal connection, but I do not know how to connect in the back.
Please, can any of you give a little help?.
Thanks and best regards.
Re: Amstrad CPC --external-- floppy cable
izham_gb94 wrote:Hello everyone, and thank you very much for this device as incredible:
I'm new to this forum.
I do not speak English, this is a translation and I apologize for errors.
I want to connect my HxC Floppy Emulator on an Amstrad 6128, at the rear connector (external).
I have seen these messages in the schema (thanks Jeff) for an internal connection, but I do not know how to connect in the back.
Please, can any of you give a little help?.
Thanks and best regards.
here a picture of the external connection:
-
- Posts: 15
- Joined: Wed Dec 03, 2008 9:16 pm
-
- Posts: 15
- Joined: Wed Dec 03, 2008 9:16 pm