everything there.. just Nor
everything there.. just Nor
Hello, updated the Hxc Gotek by upd file. from last archive. turned on two buttons pressed rotating segments.. flashes 3 times.. back to loader.
I have copied all the files from the manager to the root dir..
Try and boot the machine.. got goes to Nor mode.. and nothing.
Help?
James
I have copied all the files from the manager to the root dir..
Try and boot the machine.. got goes to Nor mode.. and nothing.
Help?
James
Re: everything there.. just Nor
https://hxc2001.com/docs/gotek-floppy-e ... oting.htmlBikerbob wrote: ↑Tue Oct 01, 2019 9:18 am Hello, updated the Hxc Gotek by upd file. from last archive. turned on two buttons pressed rotating segments.. flashes 3 times.. back to loader.
I have copied all the files from the manager to the root dir..
Try and boot the machine.. got goes to Nor mode.. and nothing.
Help?
James
This doesn't work : I see "Nor" on the display when inserting the USB stick
The emulator is in "NORmal mode".
Since you don't have any OLED or LCD screen, you need to use the indexed mode or the "autoboot"/file selector mode if you have an Amiga/Atari ST/CPC.
- In indexed mode you must use the indexed config file and name the files images DSKA0000.XXX, DSKA0001.XXX, DSKA0002.XXX (replace XXX by the original file extension.)
- In "autoboot"/file selector mode you must use the "autoboot"/file selector config file and the autoboot.hfe available for your machine. The images selection is done with a file selector software (autoboot.hfe) to set the "slots" (supported on Atari ST, Amiga, CPC).
See the usage page for more details.
The HXCSDFE.CFG config files and autoboot.hfe files are in the firmware archive.
Re: everything there.. just Nor
I updated it--- when turned on I held both buttons .. I got loader.. spinning dashes.. then 3 flashes and Nor..
So your telling me I should do what I have already done??
I said I downloaded the manager files for the Atari and put them in the root directory of the USB
Everything is there.. just Nor
So I am sorry if you are trying to tell me something else I am missing it???
Attached is the root dir- the UPD was removed after I did the update.. Hope I did it right.
James
So your telling me I should do what I have already done??
I said I downloaded the manager files for the Atari and put them in the root directory of the USB
Everything is there.. just Nor
So I am sorry if you are trying to tell me something else I am missing it???
Attached is the root dir- the UPD was removed after I did the update.. Hope I did it right.
James
- Attachments
-
- hxc.jpg (53.49 KiB) Viewed 12510 times
Re: everything there.. just Nor
So that directory is what I have minus the UPD..
This is the video of what I am getting.
https://drive.google.com/drive/folders/ ... sp=sharing
This is the video of what I am getting.
https://drive.google.com/drive/folders/ ... sp=sharing
Re: everything there.. just Nor
Where did you take this CFG file exactly ? It doesn't have a normal size...
Please use the one in the firmware archive :
https://hxc2001.com/download/floppy_dri ... rmware.zip
(the indexed version !)
Please use the one in the firmware archive :
https://hxc2001.com/download/floppy_dri ... rmware.zip
(the indexed version !)
Re: everything there.. just Nor
Sorry Jeff, I would have sworn I took everything out of that archive.
You were correct it was the cfg.
I used the Autoboot config, now I am at the menu. All seems to be fine.
Thanks for your support.
James
You were correct it was the cfg.
I used the Autoboot config, now I am at the menu. All seems to be fine.
Thanks for your support.
James
Re: everything there.. just Nor
Sorry to be posting again..
I am in the menu now.. I set disks to the slots press F7 to reboot.. and I am back in the menu.
I cannot seem to launch a disk.
James
I am in the menu now.. I set disks to the slots press F7 to reboot.. and I am back in the menu.
I cannot seem to launch a disk.
James
Re: everything there.. just Nor
Which files images ? (which types ?)
Re: everything there.. just Nor
To be sure please use the attached cfg file.
Re: everything there.. just Nor
I have both ST and STX files.
I was not able to ever load an STX file. Most ST files would load.
James
I was not able to ever load an STX file. Most ST files would load.
James
Re: everything there.. just Nor
Ok then this is normal.
Use this tool to convert STX to HFEv3 :
https://hxc2001.com/download/floppy_dri ... t_beta.zip
(You can batch convert them)
Re: everything there.. just Nor
James