Switching between internal Floppy and HxC
Switching between internal Floppy and HxC
Is there an easy way to implement swapping between HxC and internal Floppy drive on an Emulator 1?
Ideally I'd want to do this while the power is on.
I realize I could switch it with one of those big massive printer port type switches (or two) but I was wondering if there is a more elegant and simple solution such as changing the devices ID etc?
As always, thanks for your help.
Mike
Ideally I'd want to do this while the power is on.
I realize I could switch it with one of those big massive printer port type switches (or two) but I was wondering if there is a more elegant and simple solution such as changing the devices ID etc?
As always, thanks for your help.
Mike
Re: Switching between internal Floppy and HxC
Just use a switch to exchange DS0 <-> DS1.futureman wrote:Is there an easy way to implement swapping between HxC and internal Floppy drive on an Emulator 1?
Ideally I'd want to do this while the power is on.
I realize I could switch it with one of those big massive printer port type switches (or two) but I was wondering if there is a more elegant and simple solution such as changing the devices ID etc?
As always, thanks for your help.
Mike
That's all
Re: Switching between internal Floppy and HxC
Hey there, could you please elaborate, I'm a little confused by what you are saying..
Do you mean swap the ID of both drives (HxC and E1's internal drive)?
ie, make HXC DS0 and E1's DS1, then swap to make HxC DS1 and E1's DS0 ?
Kind regards
Mike
Do you mean swap the ID of both drives (HxC and E1's internal drive)?
ie, make HXC DS0 and E1's DS1, then swap to make HxC DS1 and E1's DS0 ?
Kind regards
Mike
Re: Switching between internal Floppy and HxC
futureman wrote:Hey there, could you please elaborate, I'm a little confused by what you are saying..
Do you mean swap the ID of both drives (HxC and E1's internal drive)?
ie, make HXC DS0 and E1's DS1, then swap to make HxC DS1 and E1's DS0 ?
Kind regards
Mike
This is a switch
V
.................../ ---- HXC DS0
HOST DS0 ----/
.............../ ---- FLOPPY DRIVE DS0
http://rocky.digikey.com/weblib/ITT%20C ... 1SDCQE.jpg
Re: Switching between internal Floppy and HxC
Ahhhhh.
Got it.
Cheers
Mike
Got it.
Cheers
Mike
Re: Switching between internal Floppy and HxC
if you want exchange drive 0 & drive 1 use a double switch :futureman wrote:Ahhhhh.
Got it.
Cheers
Mike
http://rocky.digikey.com/weblib/ITT%20C ... J1ZQE2.jpg
Re: Switching between internal Floppy and HxC
Ordered HxC for my E1.
Will post pics of how I go.
Cheers.
Mike
Will post pics of how I go.
Cheers.
Mike
-
- Posts: 41
- Joined: Sun Feb 17, 2008 10:22 pm
- Location: Ile de France
- Contact:
Re: Switching between internal Floppy and HxC
Jeff you write "Just use a switch to exchange DS0 <-> DS1."
yes... but when I switch the HxC in DS1 position, like that (jumper : # red) :
3 2 1 0
x x x x Drive B
x x # x
x x # x Drive A
The Emulator II is able to read disk images but unable to write or format the same disk image
yes... but when I switch the HxC in DS1 position, like that (jumper : # red) :
3 2 1 0
x x x x Drive B
x x # x
x x # x Drive A
The Emulator II is able to read disk images but unable to write or format the same disk image
Re: Switching between internal Floppy and HxC
Any error message ?jbfairlight wrote:Jeff you write "Just use a switch to exchange DS0 <-> DS1."
yes... but when I switch the HxC in DS1 position, like that (jumper : # red) :
3 2 1 0
x x x x Drive B
x x # x
x x # x Drive A
The Emulator II is able to read disk images but unable to write or format the same disk image
And at the DS0/ID0 position ? Are you able to write ?
-
- Posts: 41
- Joined: Sun Feb 17, 2008 10:22 pm
- Location: Ile de France
- Contact:
Re: Switching between internal Floppy and HxC
Sur l'Emulator II :
Disk [1-8]
DiskFormat Error
Et sur le HxC :
OS_3.1.hfe
S:000/080 S:0
Et oui si le HxC est ID0 ca fonctionne parfaitement et donc fonctionne pour la copie des sons et des formats speciaux du HxC vers lecteur de disquettes.
Mais il faut absolument qu'il soit en ID1 (second) pour permettre la copie des boot secteurs particulier de certaines disquettes.
Comme les disquettes : Test mémoire, Test scanner, Test sons, et même copie de version d'OS...
Car le logiciel de l'Emulator ne copie bas niveau (fonction 8 [8-FORMAT DISK] se qui implique un formatage suivi de la copie du boot strap) que du lecteur I vers le lecteur 2.
Alors que pour les sons il est possible de les charger sur le 1 et le 2 et des les sauver sur le 1 ou 2
Disk [1-8]
DiskFormat Error
Et sur le HxC :
OS_3.1.hfe
S:000/080 S:0
Et oui si le HxC est ID0 ca fonctionne parfaitement et donc fonctionne pour la copie des sons et des formats speciaux du HxC vers lecteur de disquettes.
Mais il faut absolument qu'il soit en ID1 (second) pour permettre la copie des boot secteurs particulier de certaines disquettes.
Comme les disquettes : Test mémoire, Test scanner, Test sons, et même copie de version d'OS...
Car le logiciel de l'Emulator ne copie bas niveau (fonction 8 [8-FORMAT DISK] se qui implique un formatage suivi de la copie du boot strap) que du lecteur I vers le lecteur 2.
Alors que pour les sons il est possible de les charger sur le 1 et le 2 et des les sauver sur le 1 ou 2
Last edited by jbfairlight on Mon Jan 23, 2012 11:48 pm, edited 2 times in total.
Re: Switching between internal Floppy and HxC
Oui Et quand le HxC est en drive 0 ça marche ou pas ?jbfairlight wrote:Sur l'Emulator II :
Disk [1-8]
DiskFormat Error
Et sur le HxC :
OS_3.1.hfe
S:000/080 S:0
-
- Posts: 41
- Joined: Sun Feb 17, 2008 10:22 pm
- Location: Ile de France
- Contact:
Re: Switching between internal Floppy and HxC
oui regarde ma réponse au dessus
alors que ca fonctionne tres bien en faisant :
A) chargement d'un son a partir du lecteur 0 dans l'emulator
B) sauvegarde d'un son de l'emulator vers le lecteur 1
alors que ca fonctionne tres bien en faisant :
A) chargement d'un son a partir du lecteur 0 dans l'emulator
B) sauvegarde d'un son de l'emulator vers le lecteur 1
Re: Switching between internal Floppy and HxC
Il est ou le HxC ?jbfairlight wrote:oui regarde ma réponse au dessus
alors que ca fonctionne tres bien en faisant :
A) chargement d'un son a partir du lecteur 0 dans l'emulator
B) sauvegarde d'un son de l'emulator vers le lecteur 1
C'est une version boitier que vous avez ?
-
- Posts: 41
- Joined: Sun Feb 17, 2008 10:22 pm
- Location: Ile de France
- Contact:
Re: Switching between internal Floppy and HxC
comment ca ?
Re: Switching between internal Floppy and HxC
jbfairlight wrote:comment ca ?
Je ne comprend pas : Il y a un HxC dans ce cas ?jbfairlight wrote:oui regarde ma réponse au dessus
alors que ca fonctionne tres bien en faisant :
A) chargement d'un son a partir du lecteur 0 dans l'emulator
B) sauvegarde d'un son de l'emulator vers le lecteur 1