HxC working with X68000 !
Re: HxC working with X68000 !
Hi there !
yesterday i decided to install my HxC on my X68030, thanks to the Namida's tutorial.
First i made my cable.
In the second time, i configured the file config with the HxC software on Generic Shugart
And then i put the jumpers on the HxC board to have 2 drives emulated.
In the last part, i took some games on gametronik website (.hdf files) and then i convets these files to .hfe
Then i mounted, for exemple Akumajo dracula, first disk image on A drive and second disk on B drive, and i reboot the X68030.
Then nothing appeared
The loading led on the HxC board stay switch on, but there's a black screen
I've checked the connection of the HxC board, and everythings looks good.
Is it an image problem?
I'm gonna test with Parodius Da image, and it's the same probleme...
With Nemesis 90 Kai, everything seems loading without problems and finally i've got this error message:
HELP!
yesterday i decided to install my HxC on my X68030, thanks to the Namida's tutorial.
First i made my cable.
In the second time, i configured the file config with the HxC software on Generic Shugart
And then i put the jumpers on the HxC board to have 2 drives emulated.
In the last part, i took some games on gametronik website (.hdf files) and then i convets these files to .hfe
Then i mounted, for exemple Akumajo dracula, first disk image on A drive and second disk on B drive, and i reboot the X68030.
Then nothing appeared
The loading led on the HxC board stay switch on, but there's a black screen
I've checked the connection of the HxC board, and everythings looks good.
Is it an image problem?
I'm gonna test with Parodius Da image, and it's the same probleme...
With Nemesis 90 Kai, everything seems loading without problems and finally i've got this error message:
HELP!
Re: HxC working with X68000 !
And what did you see on the LCD ? RA or RB ?amobile wrote: The loading led on the HxC board stay switch on, but there's a black screen
Re: HxC working with X68000 !
Jeff, I think now it's the moment to add X68000 disk eject emulation on your wonderful HxC!
Re: HxC working with X68000 !
Not possible without additional hardware...caius wrote:Jeff, I think now it's the moment to add X68000 disk eject emulation on your wonderful HxC!
And unfortunately there are no info at all about the specials features of the X68000 floppy interface. (And i don't have any x68000...)
Re: HxC working with X68000 !
I have a X68000 CompactXVI, feel free ask if you need some signal measurements.Jeff wrote:Not possible without additional hardware...caius wrote:Jeff, I think now it's the moment to add X68000 disk eject emulation on your wonderful HxC!
And unfortunately there are no info at all about the specials features of the X68000 floppy interface. (And i don't have any x68000...)
Re: HxC working with X68000 !
caius wrote:I have a X68000 CompactXVI, feel free ask if you need some signal measurements.Jeff wrote:Not possible without additional hardware...caius wrote:Jeff, I think now it's the moment to add X68000 disk eject emulation on your wonderful HxC!
And unfortunately there are no info at all about the specials features of the X68000 floppy interface. (And i don't have any x68000...)
In fact i need to know the purpose of these signals :
OPTION SELECT 0(X68ONLY) 1
OPTION SELECT 1(X68ONLY) 3
N.C/HEAD LOAD(X68ONLY) 4
OPTION SELECT 2(X68ONLY) 5
OPTION SELECT 3(X68ONLY) 7
EJECT(X68ONLY) 9
EJECT MASK(X68ONLY) 11
LED BRINK(X68ONLY) 13
DISK IN(X68ONLY) 15
ERR DISK(X68ONLY) 17
FDD INT(X68ONLY) 19
Re: HxC working with X68000 !
OK.Do you think having a X68000 would help you in understanding better these signals?Jeff wrote:
OPTION SELECT 0(X68ONLY) 1
OPTION SELECT 1(X68ONLY) 3
N.C/HEAD LOAD(X68ONLY) 4
OPTION SELECT 2(X68ONLY) 5
OPTION SELECT 3(X68ONLY) 7
EJECT(X68ONLY) 9
EJECT MASK(X68ONLY) 11
LED BRINK(X68ONLY) 13
DISK IN(X68ONLY) 15
ERR DISK(X68ONLY) 17
FDD INT(X68ONLY) 19
Are these signals all needed to be emulated?
In my case this is the pinout:
http://www.geocities.co.jp/SiliconValle ... c_fdd.html
Re: HxC working with X68000 !
Yes. I should be able to get one from a friend.caius wrote: OK.Do you think having a X68000 would help you in understanding better these signals?
That's a good question. Actually i don't know.caius wrote: Are these signals all needed to be emulated?
Re: HxC working with X68000 !
mhhh it seems to have a solution on this page:
http://kitahei88.dtiblog.com/blog-entry-48.html
Need to be translated.
http://kitahei88.dtiblog.com/blog-entry-48.html
Need to be translated.
Re: HxC working with X68000 !
Jeff wrote:mhhh it seems to have a solution on this page:
http://kitahei88.dtiblog.com/blog-entry-48.html
Need to be translated.
Yes, I already seen this solution, but , if I'm not wrong, at the end of the page there is picture which shows an error so this solution is far from perfect.Maybe we have to contact kitahei88, he is also member of this forum.
It would great if we can make your Hxc emulator fully working with X68000!
Re: HxC working with X68000 !
THis is possible but for this someone must take an oscilloscope and find the meaning of each signal.caius wrote: It would great if we can make your Hxc emulator fully working with X68000!
Question: did you have a x68000 floppy disk drive board ?
If yes can you make a top and a bottom pictures (in High quality...) ?
Re: HxC working with X68000 !
Yes but keep in mind I have a X6800 CompactXVI which has different floppy (it has 3.5" with soft eject feature) from other model but I think signals are the same in all models.Jeff wrote:THis is possible but for this someone must take an oscilloscope and find the meaning of each signal.caius wrote: It would great if we can make your Hxc emulator fully working with X68000!
Question: did you have a x68000 floppy disk drive board ?
If yes can you make a top and a bottom pictures (in High quality...) ?
I have two faulty floppy drives, if you want I can send you them for studying.
Re: HxC working with X68000 !
To France? No they will be lost...caius wrote: I have two faulty floppy drives, if you want I can send you them for studying.
Can you take some high resolution pictures of the pcb ?
Re: HxC working with X68000 !
I don't think they will be lost, I bought a lot of stuff overseas and I never lost anything.Don't forget I'm in Italy, close to you..Jeff wrote:To France? No they will be lost...caius wrote: I have two faulty floppy drives, if you want I can send you them for studying.
Can you take some high resolution pictures of the pcb ?
Ok, tomorrow I'll take and send you some high resolution pictures, for now I have only this:
Re: HxC working with X68000 !
Jeff> i see "RA" on the LED screen
I've tested many games that should works on X68030, but with the HxC they don't...
Nemesis 90 (error screen... if someone know how to install it on HDD?)
Akumajo (black screen, nothing happen... if someone know how to install it on HDD?)
*****edit*****
error message when i use the hdinst utility on the second floppy Cotton (refuse to start directly on floppy, need to be installed but it's not working...)
Dragon Spirit (error screen)
I don't know if the problem comes with the floppy images ...
Other observation, there's no sounds.
I saw that a cable is plugged between the internal speaker and the floppy drives...
The games i tested and works
Daikaimura
Phalanx
Salamander
View Point
Sol Feace
If someone know how to install them on HDD?
I've tested many games that should works on X68030, but with the HxC they don't...
Nemesis 90 (error screen... if someone know how to install it on HDD?)
Akumajo (black screen, nothing happen... if someone know how to install it on HDD?)
*****edit*****
error message when i use the hdinst utility on the second floppy Cotton (refuse to start directly on floppy, need to be installed but it's not working...)
Dragon Spirit (error screen)
I don't know if the problem comes with the floppy images ...
Other observation, there's no sounds.
I saw that a cable is plugged between the internal speaker and the floppy drives...
The games i tested and works
Daikaimura
Phalanx
Salamander
View Point
Sol Feace
If someone know how to install them on HDD?